进排水管道 for the dishwasher

Thanks so much to everyone who gave me suggestions.  YOu all have been really helpful.

Stopby, it seems whenever you can, you try to answer people's questions as much as possible.  Thank you so much for answering my questions in qqh as well.  I asked you pretty basic questions quite a few times, and you have been really patient.  Your patience is really helpful to a novice (vegetable bird)  :)

 

I am not sure if I am using the right terms for everything.  I hope the pictures help.

How much work is involved in 拆掉进排水管道 for the dishwasher?  Could anyone give me some detailed suggestions or what was your experience?  Thanks.

It actually seems a lot of work.  I tried the 进水管道 first using the tool/wrench in picture 3.  I turned off the water valve, and then was using the wrench to twist the nut.  I am not sure if the nut moved, but a little bit of water came out. I think the water had been left/sitting in the pipe for some time. 

But it was difficult to move the nut due to its location.  I was having problem turning the wrench left because the nut is so close to the bottom of the cabinet, leaving no room for me to twist the wrench.  So I had no success with the pipe.

所有跟帖： 

• 你要顺着铜管往前， 找到铜管和软管接头的地方，从那里拆。 -StopBy- ♂ (57 bytes) () 02/04/2016 postreply 08:24:42

• Picture 2 is the drain pipe. What about picture 1? There is no -joeyli- ♀ (0 bytes) () 02/04/2016 postreply 08:39:48

• 图2， 左边还有根管子，是什么？ -StopBy- ♂ (95 bytes) () 02/04/2016 postreply 08:44:21

• that pipe you asked should be for the nozzel. The one that spray -joeyli- ♀ (190 bytes) () 02/04/2016 postreply 08:58:05

• 工具不对啊， 我有一种是小的片状的，还有一种是两节的。 -ppingann- ♀ (299 bytes) () 02/04/2016 postreply 08:35:57

• 左边的呆板手可以用， 右边套筒不行。楼主的活络扳手也行，不过没有呆板手方便，尤其是空间狭小的情况下。 -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 08:41:15

• Is that because adjustable wrence is too big? -joeyli- ♀ (0 bytes) () 02/04/2016 postreply 08:53:01

• What is the name of the tool on the left? What is that for? Th -joeyli- ♀ (99 bytes) () 02/04/2016 postreply 08:42:31

• thin wrench set -ppingann- ♀ (0 bytes) () 02/04/2016 postreply 08:44:33

• open end wrenches -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 08:46:48

• Sorry I meant on the right in my question. -joeyli- ♀ (95 bytes) () 02/04/2016 postreply 08:54:48

• 学名我也不知道啊， 是two pieces wrench的一种 -ppingann- ♀ (0 bytes) () 02/04/2016 postreply 09:43:28

• socket wrenches， 套筒 -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 09:54:16

• Basin wrench is best for under counter jobs... -borisg- ♂ (0 bytes) () 02/04/2016 postreply 08:44:57

• Is this wrench better (pls see pic inside)? Stopby, I added a c -joeyli- ♀ (163 bytes) () 02/04/2016 postreply 09:09:42

• not really, depends on your skill. -StopBy- ♂ (134 bytes) () 02/04/2016 postreply 09:23:48

• Yes to both of your Qs. -joeyli- ♀ (0 bytes) () 02/04/2016 postreply 09:34:36

• 扳手太大，用小一点的或钳子也可以。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:20:27

• 你的经验多， 会不会有的洗碗机没有软管做进水？ -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 09:27:34

• 很可能这根铜管就是直接进水，到洗碗机下看一眼就知道了。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:39:10

• 我觉得有点像。那应该两头都拆了，再搬？这样保险点？ -StopBy- ♂ (112 bytes) () 02/04/2016 postreply 09:44:25

• 可以只拆洗碗机下的头，没必要拆水池下。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:47:45

• I will try that. Thx. -joeyli- ♀ (250 bytes) () 02/04/2016 postreply 09:52:29

• Right. If you look at the first picture in my original post -joeyli- ♀ (422 bytes) () 02/04/2016 postreply 09:45:45

• 不明白你为什么要拆？不是只要移动一点吗？ -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:51:05

• I moved a little, and then saw all that area with dust that I ca -joeyli- ♀ (332 bytes) () 02/04/2016 postreply 09:56:20

• 如果只想清洁的话， 我觉得别拆管子为好，你没经验， 装回去的时候， 搞不好漏水就麻烦大了。 -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 09:59:05

• I don't have to use the dishwaser -joeyli- ♀ (211 bytes) () 02/04/2016 postreply 10:05:22

• 万一你以后要卖房子，房检要检查洗碗机，咋整? -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 10:12:05

• Handy men. -joeyli- ♀ (66 bytes) () 02/04/2016 postreply 10:14:40

• 精神可嘉。从未闻为打扫卫生而拆洗碗机的。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 10:00:00

• Thanks for your compliment :) -joeyli- ♀ (63 bytes) () 02/04/2016 postreply 10:03:05

• 因为铜管很硬，很难装回去的。虽然我会，但不会找这个麻烦。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 10:03:38

• I will follow your advice. I won't touch it anymore. -joeyli- ♀ (292 bytes) () 02/04/2016 postreply 10:09:10

• 听老房的吧，别没事找事了。别忘了把拧松的水管拧紧， 打开水，观察一下是不是漏水。 -StopBy- ♂ (0 bytes) () 02/04/2016 postreply 10:17:49

• I will listen to both of you. This is my learning process. Tha -joeyli- ♀ (0 bytes) () 02/04/2016 postreply 10:25:15

• I think I will try with pliers first, as you suggested -joeyli- ♀ (371 bytes) () 02/04/2016 postreply 09:38:44

• 用平头螺丝刀松开钢套圈。逆时针是松。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:42:55

• How do I use a flat screwdriver to loosen the nut? -joeyli- ♀ (64 bytes) () 02/04/2016 postreply 09:48:33

• 拧松那上面的螺丝啊。你真是没有任何经验，为什么要干这活呢？ -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:53:41

• 你还是别拆了，拆开你也装不上啊。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 09:56:44

• If I never do anything, how do I gain the experience? :) -joeyli- ♀ (333 bytes) () 02/04/2016 postreply 10:01:23

• 照片上很明显有螺丝在钢圈上（白下水管）。学装修是有问题解决问题，而不是没事找事。 -房崇- ♂ (0 bytes) () 02/04/2016 postreply 10:06:56

• I see. I was talking about 进水管道 all this time. -joeyli- ♀ (243 bytes) () 02/04/2016 postreply 10:12:29

• 你问的：What about the drain pipe in picture 2? Where should I disl -房崇- ♂ (0 bytes) () 02/04/2016 postreply 11:27:20

• ACtuallly 下水管 has a leak. -joeyli- ♀ (204 bytes) () 02/04/2016 postreply 10:20:27

• Why 下水管 has two parts? -joeyli- ♀ (361 bytes) () 02/04/2016 postreply 10:42:11

• 赞出谋划策。 -source4book.com- ♀ (0 bytes) () 02/04/2016 postreply 11:14:07