I think I will try with pliers first, as you suggested

来源: joeyli 于 2016-02-04 09:38:44 [] [旧帖] [给我悄悄话] 阅读数 : (371 bytes)
回答: 扳手太大，用小一点的或钳子也可以。 由 房崇 于 2016-02-04 09:20:27

I guess I need a wrench set.  This is what you meant by "小一点的".  They individually would be easier to handle if you find the right size for the job than my adjustable wrench. 

What about the drain pipe in picture 2?  Where should I dislocate things?

Thx to you for your previous help too. 

所有跟帖： 

• 用平头螺丝刀松开钢套圈。逆时针是松。 -房崇- ♂ 给 房崇 发送悄悄话 房崇 的博客首页 (0 bytes) () 02/04/2016 postreply 09:42:55

• How do I use a flat screwdriver to loosen the nut? -joeyli- ♀ 给 joeyli 发送悄悄话 (64 bytes) () 02/04/2016 postreply 09:48:33

• 拧松那上面的螺丝啊。你真是没有任何经验，为什么要干这活呢？ -房崇- ♂ 给 房崇 发送悄悄话 房崇 的博客首页 (0 bytes) () 02/04/2016 postreply 09:53:41

• 你还是别拆了，拆开你也装不上啊。 -房崇- ♂ 给 房崇 发送悄悄话 房崇 的博客首页 (0 bytes) () 02/04/2016 postreply 09:56:44

• If I never do anything, how do I gain the experience? :) -joeyli- ♀ 给 joeyli 发送悄悄话 (333 bytes) () 02/04/2016 postreply 10:01:23

• 照片上很明显有螺丝在钢圈上（白下水管）。学装修是有问题解决问题，而不是没事找事。 -房崇- ♂ 给 房崇 发送悄悄话 房崇 的博客首页 (0 bytes) () 02/04/2016 postreply 10:06:56

• I see. I was talking about 进水管道 all this time. -joeyli- ♀ 给 joeyli 发送悄悄话 (243 bytes) () 02/04/2016 postreply 10:12:29

• 你问的：What about the drain pipe in picture 2? Where should I disl -房崇- ♂ 给 房崇 发送悄悄话 房崇 的博客首页 (0 bytes) () 02/04/2016 postreply 11:27:20

• ACtuallly 下水管 has a leak. -joeyli- ♀ 给 joeyli 发送悄悄话 (204 bytes) () 02/04/2016 postreply 10:20:27

• Why 下水管 has two parts? -joeyli- ♀ 给 joeyli 发送悄悄话 (361 bytes) () 02/04/2016 postreply 10:42:11

请您先登陆，再发跟帖！