看图。1.自己怎么修?外面的板子face还好,不想换,抽屉去哪里买?ikea的尺寸不对。
2.去找哪里定做? 谢谢。
看图。1.自己怎么修?外面的板子face还好,不想换,抽屉去哪里买?ikea的尺寸不对。
2.去找哪里定做? 谢谢。
• Glue back。 -laota- ♀ (0 bytes) () 08/27/2012 postreply 12:17:49
• 用什么glue? -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:24:16
• Use the type of glue for wood that has some thickness/volume whe -laota- ♀ (146 bytes) () 08/27/2012 postreply 12:29:07
• 后面那一块不像是木头,像是塑料类? -20146- ♀ (0 bytes) () 08/27/2012 postreply 12:30:41
• 是塑料。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:32:14
• 八仙过海,各显神通 -上海大男人- ♂ (219 bytes) () 08/27/2012 postreply 12:59:53
• Then no screws。 -laota- ♀ (0 bytes) () 08/27/2012 postreply 13:27:50
• And no wood glues. You can check out epoxy glues. Read the lab -laota- ♀ (0 bytes) () 08/27/2012 postreply 13:31:17
• Yes way。 As long as you do it right. -laota- ♀ (0 bytes) () 08/27/2012 postreply 12:30:27
• 这个看上去怎么好像粘上去的,日久失修了吧。去home depot或者lowe's看看 -crisps- ♀ (0 bytes) () 08/27/2012 postreply 12:18:18
• 会者不难,难在我没有一点线索。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:26:35
• lg连drill也不会用。没用过。钉子都是我钉 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:31:50
• 量好抽屉尺寸,去木工店裁好几块板子 -周梦蝶- ♀ (166 bytes) () 08/27/2012 postreply 12:28:55
• 需要一个track一样的东西吗? -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:33:48
• 上面有个track一样的东西,下面左右也有一个。坏掉的塑料抽屉中间有一个槽。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:30:00
• 要凿槽就比较麻烦,除非你按槽的尺寸量, -周梦蝶- ♀ (25 bytes) () 08/27/2012 postreply 13:25:30
• 买角铁钉上去。 -专家建议- ♀ (0 bytes) () 08/27/2012 postreply 12:27:28
• 这个最正点儿,呵呵 -汉代蜜瓜- ♀ (0 bytes) () 08/27/2012 postreply 12:28:37
• 这方式最简单。 -lily5170- ♀ (0 bytes) () 08/27/2012 postreply 12:29:56
• 这个是最省事的法子,但是抽屉面板上会留下至少一个螺丝 -周梦蝶- ♀ (0 bytes) () 08/27/2012 postreply 12:30:03
• 从反面钉,螺丝不要太长。 -专家建议- ♀ (0 bytes) () 08/27/2012 postreply 12:32:06
• 有理。以后抽屉别放太重的东西就行。 -周梦蝶- ♀ (0 bytes) () 08/27/2012 postreply 13:26:12
• 看起来TA里面的面板象是塑料的,钉不进去或会裂的。可能只能用胶水。 -itistrue- ♀ (0 bytes) () 08/27/2012 postreply 12:31:26
• 是塑料的。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:32:46
• 晕!!! -汉代蜜瓜- ♀ (0 bytes) () 08/27/2012 postreply 12:36:26
• ikea的抽屉好像也是塑料的,不是木头的。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:37:52
• 先用钻头打眼,再上螺丝,会避免开裂。 -专家建议- ♀ (0 bytes) () 08/27/2012 postreply 12:35:57
• 塑料的啊,够麻烦的,钻眼的时侯 -周梦蝶- ♀ (59 bytes) () 08/27/2012 postreply 13:27:46
• 去HD买那种金属的直角薄片,螺丝固定。 -易木- ♂ (0 bytes) () 08/27/2012 postreply 12:29:04
• 塑料也可以吗? -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:35:58
• 你这个面板象是塑料的,用螺丝固定可能会裂,先试试胶水。 -itistrue- ♀ (0 bytes) () 08/27/2012 postreply 12:33:00
• Gorilla glue吗?包装上没写适用于塑料。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:41:03
• 先用电砖砖一pilot hole, 再用螺丝固定就不会裂. -sinke- ♂ (0 bytes) () 08/27/2012 postreply 12:43:39
• 不修,把这个抽屉废了。把抽屉面固定到柜子上就行了。 -RedDragon- ♂ (0 bytes) () 08/27/2012 postreply 12:39:10
• I wish.两个坏掉了,一半年内,有可能要买房。 -H.I.- ♀ (0 bytes) () 08/27/2012 postreply 12:43:32