有懂行的帮我看看这个boiler 是怎么了

谢谢！

 

1) the screen was red wland the "help" button was flashing (see picture attached)

 

2)the pipe circled in the pictures was dripping 

 

3)I turned it on about 6, so in that time, that drip created water in the basement. 

 

I did turn it off and back on, and the screen came back on white, not red, but ultimately I decided to turn it back off because of the amount of water dripping from it. 

所有跟帖： 

• 铜管要插到任何一个圆孔中。蓝色的是个pump -sweetptt- ♂ (0 bytes) () 09/30/2020 postreply 19:42:35

• 好的，谢谢 -NPshowway- ♀ (104 bytes) () 09/30/2020 postreply 19:55:27

• 铜管是不是太长，不能插进去-：） -NPshowway- ♀ (0 bytes) () 09/30/2020 postreply 19:59:04

• 总能想出办法 -sweetptt- ♂ (0 bytes) () 09/30/2020 postreply 20:08:07

• 好的 -NPshowway- ♀ (0 bytes) () 09/30/2020 postreply 20:24:42

• desolder the joint above first -家教- ♂ (0 bytes) () 09/30/2020 postreply 22:16:00

• 好，谢谢 -NPshowway- ♀ (0 bytes) () 10/01/2020 postreply 04:43:05

• 如果原来就是接进去的那么应该能不锯就装回去。既然已经松开了不妨把泵里面清洗一下再装。 -二胡一刀- ♂ (0 bytes) () 10/01/2020 postreply 08:41:47

• 锯短一点，下面放个漏斗 -事后诸葛- ♂ (106 bytes) () 10/01/2020 postreply 09:49:49