几个插座没电了。查了一下circuit breaker,没问题,每根线都是120V输出。其中一个没有电的插座,当用Voltage Detector的时候会显示有电,但万用表测不到电压。不理解的是为什么没有电压,但Voltage Detector给出信号。插座盒子里的火线都接在插座上,所以附近没有别的火线导致Voltage Detector给出信号。
问个关于电的技术问题
所有跟帖:
• reset all the GFCs. -borisg- ♂ (0 bytes) () 11/21/2018 postreply 12:30:24
• 能否具体解释一下其中的道理? -pigtiger1973- ♀ (0 bytes) () 11/21/2018 postreply 12:53:07
• sometimes depends the way the circuits are wired, if one GFC is -borisg- ♂ (0 bytes) () 11/21/2018 postreply 12:56:31
• 有可能这几个没电的插座是某个GFCI的下游插座,特别是这些插座中有在车库,室外或者厨房,卫生间。 -易木- ♂ (0 bytes) () 11/21/2018 postreply 18:10:35
• +1 -famer- ♂ (0 bytes) () 11/21/2018 postreply 13:59:44
• 如果插座在一条线上,可能上游的一个坏了,没有连接到后面的。插座坏了或电线松动脱落。 -QinHwang- ♂ (0 bytes) () 11/21/2018 postreply 13:09:15
• 地线开路了 -事后诸葛- ♂ (98 bytes) () 11/21/2018 postreply 14:08:00
• 整个electrical trouble shooting tool -slow_quick- ♂ (613 bytes) () 11/21/2018 postreply 14:19:19
• 不一定买我说的那个,看看附近Sears有没有类似的,大概12刀就能买一个管用的 -slow_quick- ♂ (29 bytes) () 11/21/2018 postreply 14:22:33
• 如果地线开了,我用万用表测火线应该给120V -pigtiger1973- ♀ (0 bytes) () 11/21/2018 postreply 14:44:12
• 电笔(Voltage Detector)比万用表灵敏度高。。。 -slow_quick- ♂ (389 bytes) () 11/21/2018 postreply 14:58:07
• QinHwang is right. -PtLandlord- ♂ (399 bytes) () 11/21/2018 postreply 14:25:05
• 是旧办法里的第一中接法。但不理解的是为什么其中一个没电,但电笔有信号。 -pigtiger1973- ♀ (62 bytes) () 11/21/2018 postreply 14:43:12
• Detector 电笔检测火线,如果你量电压就要有回路, 也许插座问题, -平静心北美- ♂ (0 bytes) () 11/21/2018 postreply 15:28:11
• 我测电压时一头接火线,一头接盒子,不是地线 -pigtiger1973- ♀ (0 bytes) () 11/21/2018 postreply 15:33:30
• 有电到但量不到电压一定不是跳闸,一定是回路的问题, -平静心北美- ♂ (71 bytes) () 11/21/2018 postreply 15:40:10
• 试试另一头接零线或地线吧。壳子不行一般就是地线不通。。。 -slow_quick- ♂ (774 bytes) () 11/21/2018 postreply 19:08:07
• The problem of old wiring is if one of the screw is not tight. -PtLandlord- ♂ (371 bytes) () 11/21/2018 postreply 20:06:28
• 一路上查,测出有电压是浮的,有电压没电流 -kingofhearts- ♂ (0 bytes) () 11/22/2018 postreply 03:50:18