帮忙估一个价

换掉约16FT长的下水道老管，上PVC。 从2楼厕所底部的T，穿过一楼到地下室。不包完工后的补墙（drywall). 大费城地区。

所有跟帖： 

• 哦 包材料， 没有转弯。 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 08:51:13

• What's the old pipe made of? -borisg- ♂ (0 bytes) () 03/29/2017 postreply 08:59:39

• iron -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:06:30

• Oops...Old cast iron pipe is hard to cut. -borisg- ♂ (0 bytes) () 03/29/2017 postreply 09:07:45

• 是要cut。 PVC就不需要cut吗？ -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:11:24

• １ 分钟割PVC，１小时割铸铁。。。其实你要看一下是不是真的需要换整个那么长的管子。 -borisg- ♂ (0 bytes) () 03/29/2017 postreply 09:13:48

• 反正都是要cut，为何不将百年老铁管换掉？ 材料是不贵的， 人工贵。 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:17:42

• 哈哈，脑洞打开。老铁管leaking可以补吗？patching -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:23:03

• I mean 脑洞大开：） -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:24:21

• Unfortunately usually rust through occurs at the T..... -borisg- ♂ (0 bytes) () 03/29/2017 postreply 09:26:39

• 可以,你找到洞就可以啊 -calvinwch- ♂ (0 bytes) () 03/29/2017 postreply 09:33:19

• Plumber说是4inch管。 我主要关心PVC管的质量。 或者PVC都是一样的。查了一下homedepot网站还是不懂。 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:10:11

• What is the price quoted by your plumber? -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:14:02

• 這個找plummer 4位數跑不了. -calvinwch- ♂ (0 bytes) () 03/29/2017 postreply 09:15:52

• 差不多。我就是不懂了，开墙不补， 然后管子一段一段的接上， 有何难？：-） -七妹- ♀ (48 bytes) () 03/29/2017 postreply 09:20:27

• It is not hard for the plumber, but very hard for you. -hhtt- ♂ (191 bytes) () 03/29/2017 postreply 09:27:18

• 第一估價給你的有保險成本, 第二,1個人幹不來. 第三 -calvinwch- ♂ (418 bytes) () 03/29/2017 postreply 09:31:54

• 啥风险？是下水道耶，不是煤气管道 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:35:29

• 你知道什麼是甲烷？Methane -calvinwch- ♂ (0 bytes) () 03/29/2017 postreply 09:38:00

• If the job is not done right, one day, all your family waste wil -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:38:46

• 別中毒就好,其它都是可以花錢弄好的. -calvinwch- ♂ (0 bytes) () 03/29/2017 postreply 09:42:23

• 看来管道工不好当的， 谢谢你们的回复，让我学到不少东西 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:48:03

• It is a job, but dirty like hell. -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:50:36

• 水管工算是真正淘糞的人,下水道中的甲烷味道不好聞的 -calvinwch- ♂ (47 bytes) () 03/29/2017 postreply 09:51:42

• 谢谢提醒。我还真是没想到这点。房客的安全很重要 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 10:14:28

• pvc 這管子沒多少錢, 16' 分兩個8'一個 connection, 2個boot + ring -calvinwch- ♂ (399 bytes) () 03/29/2017 postreply 09:28:51

• 谢谢，找的朋友介绍的老美单干户。 just a little over $1000. Seems to be a good de -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:33:01

• Find a good one, not the cheapest one! -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:36:28

• I agree, the guy has been working as plumber for 30 years, I gue -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:39:23

• 上面时拧的，下面切割。管道工每小时2000 到8000 工钱。你这个活，一个多小时，3000-4000 算便宜 -润涛阎- ♂ (642 bytes) () 03/29/2017 postreply 09:38:48

• Pay that much! That will be my next job! -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:42:08

• are you aure this is not RMB? :) 管道工每小时2000 到8000 工钱 -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:42:39

• 如果只要1000，那就非常合理。我一个朋友最近换了一根管道，花了3800，本来就PVC的，不需要切割 -润涛阎- ♂ (0 bytes) () 03/29/2017 postreply 09:42:42

• Your friend must live in high rent district ! -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:44:50

• At Trump Building in NYC :) -七妹- ♀ (0 bytes) () 03/29/2017 postreply 09:55:01

• 马里兰州，他打电话找了很多家。 -润涛阎- ♂ (0 bytes) () 03/29/2017 postreply 09:55:46

• 哈哈....2000-8000一小時...... 我半價就好你請我. -calvinwch- ♂ (65 bytes) () 03/29/2017 postreply 09:45:37

• 电动砂轮切，用不了一个小时。如果你在马里兰州，换任何一根管子2000以下没可能 -润涛阎- ♂ (0 bytes) () 03/29/2017 postreply 09:54:22

• Bethesda, MD? 75th richest cities in US with avg income $208k -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 09:59:43

• 那里的人收入很高。我说我飞过去不用工钱了，机票才几百。他说不好意思 -润涛阎- ♂ (0 bytes) () 03/29/2017 postreply 10:05:07

• 2000-8000一小时，你是说日元？ -tz2000- ♂ (0 bytes) () 03/29/2017 postreply 14:16:35

• It could cost this much since it is replacing main plumbing stac -hhtt- ♂ (0 bytes) () 03/29/2017 postreply 18:59:06