从你给出的Codes 看,
第一,最常见的是火花塞从来没换过。把火花塞换掉看看如何。如果不是火花塞的问题:
第二,fuel injectors 至少有一个堵塞了,或者工作不正常了。干脆全部换掉。
第三,高压圈有一个电压不够了。干脆全部换掉。
第四种可能,就是那个crankshaft position sensor。这个坏掉的可能性比较低,只是不能排除。
这么老的车,如果你自己不会修,就换新车吧。实在到了报废的年龄了。这些都需要你自己修,否则,修理费比车还贵。不值得。
从你给出的Codes 看,
第一,最常见的是火花塞从来没换过。把火花塞换掉看看如何。如果不是火花塞的问题:
第二,fuel injectors 至少有一个堵塞了,或者工作不正常了。干脆全部换掉。
第三,高压圈有一个电压不够了。干脆全部换掉。
第四种可能,就是那个crankshaft position sensor。这个坏掉的可能性比较低,只是不能排除。
这么老的车,如果你自己不会修,就换新车吧。实在到了报废的年龄了。这些都需要你自己修,否则,修理费比车还贵。不值得。
•
Thanks a lot for the advice. Got a car two years ago and still p
-blueisu-
♀
(325 bytes)
()
11/13/2015 postreply
14:00:36
•
yes. ignition coil.
-润涛阎-
♂
(0 bytes)
()
11/13/2015 postreply
14:20:34
•
Could overfilled engine oil cause this problem?
-blueisu-
♀
(228 bytes)
()
11/13/2015 postreply
22:06:56
•
基本不可能。我的第一辆车引擎盖有裂痕,到处是油。spark plug wire 上的橡胶套应该可以阻止机油渗入。
-周老大-
♂
(0 bytes)
()
11/14/2015 postreply
20:05:57
WENXUECITY.COM does not represent or guarantee the truthfulness, accuracy, or reliability of any of communications posted by other users.
Copyright ©1998-2025 wenxuecity.com All rights reserved. Privacy Statement & Terms of Use & User Privacy Protection Policy