回这个封条只起装饰作用

来源: 老生长谈 于 2014-02-16 13:03:44 [] [旧帖] [给我悄悄话] 阅读数 : (648 bytes)

the sealer is a paste.  before windshield was put on, the installer used a applicator (like a grease gun) to put the sealer in a shape of strip along the to-be lower edge of the windshield.  when the glass was set, the sealer would seal off moisture/water.  at the end, they put a rubber strip to the groove and make it look good.

if you really want it, dealer has it, or call auto glass companies to buy one.  it's inexpensive. from your pic, if it is still intact, just go get a rubber glue (homedepot has a tube) and glue it back.  it will not affect water tightness.  good luck.
 

所有跟帖： 

• 明白了，再问一下！这个rubber glue是在homedepot买好，还是在auto parts买好？ -ouyanghui- ♂ 给 ouyanghui 发送悄悄话 (69 bytes) () 02/16/2014 postreply 13:17:53

• HD 买就可以了。噪声大与它无关。可能需要tune up -老生长谈- ♂ 给 老生长谈 发送悄悄话 (119 bytes) () 02/16/2014 postreply 13:45:58

• 2008年的toyota -ouyanghui- ♂ 给 ouyanghui 发送悄悄话 (0 bytes) () 02/16/2014 postreply 14:10:43

• 到junk yard去拆一个同年同款的装上即可。 -US_CAR.- ♂ 给 US_CAR. 发送悄悄话 (0 bytes) () 02/16/2014 postreply 16:20:28

• 没看清，脱了粘上，丢了才需要另找， -US_CAR.- ♂ 给 US_CAR. 发送悄悄话 (0 bytes) () 02/16/2014 postreply 20:21:44

请您先登陆，再发跟帖！