回复：DIY Camry换冷却液

来源: Gulang 于 2013-02-21 19:57:41 [] [旧帖] [给我悄悄话] 阅读数 : (1643 bytes)
回答: DIY Camry换冷却液 由 MoonRivertttt 于 2013-02-21 19:44:50

About the timing belt change. 请教： 装回Crankshaft pulley bolt 时怎么知道已达到215nm？

 

” 把皮带轮转到0”是否就是Setting No.1 Cylinder to TDC? “上止点” = TDC?

所有跟帖： 

• "Crankshaft pulley bolt 时怎么知道已达到215nm" -----You have use torque -MoonRivertttt- ♂ 给 MoonRivertttt 发送悄悄话 (867 bytes) () 02/21/2013 postreply 20:32:52

• Thanks. Since it is aligned to "0" what are the "15 10 5" marks -Gulang- ♂ 给 Gulang 发送悄悄话 (0 bytes) () 02/22/2013 postreply 17:47:51

• They are timing marks -MoonRivertttt- ♂ 给 MoonRivertttt 发送悄悄话 (330 bytes) () 02/23/2013 postreply 05:36:15

• 多谢释疑。换了timing belt 后 gas mileage 会有变化吗? -Gulang- ♂ 给 Gulang 发送悄悄话 (0 bytes) () 02/24/2013 postreply 17:07:53

• 应该不会因为Timing不应该改变， 不过我没有记录 -MoonRivertttt- ♂ 给 MoonRivertttt 发送悄悄话 (0 bytes) () 02/25/2013 postreply 15:33:52

• Thanks. All posts are very helpful. -Gulang- ♂ 给 Gulang 发送悄悄话 (0 bytes) () 02/26/2013 postreply 19:20:50

请您先登陆，再发跟帖！