remove the big nut on the shaft outside end then punch the shaft

来源: fixanycars 于 2010-07-04 13:53:13 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (377 bytes)
回答: 图看不见 由 曲肱而枕 于 2010-07-03 23:52:36

remove the big nut on the shaft outside end then punch the shaft in from the hub, until it is loose, use a prier bar to pry the inner shaft end out off the differential house or transmission, at this point you need to swivel the hub away to make more space in order to get the shaft out. You don't need to disassemble the low arm ball joint by this way for the CV boot change.

所有跟帖： 

• no, won't work. please see picture on above. -triangle- ♂ 给 triangle 发送悄悄话 (36 bytes) () 07/04/2010 postreply 14:08:06

请您先登陆，再发跟帖！