If losing power occurred right after IACV cleaning, then

来源: 心字头上一把刀 于 2010-05-22 12:14:48 [] [旧帖] [给我悄悄话] 阅读数 : (347 bytes)

try to focus on this area(air intake). I remember there is a thick tubing attached to the section which connects the airfilter box and manifold. It was the most difficult one to remove and it's thick because it has a heat insulation as outer layer for shielding. Make sure the inside tubing is plugged in instead of just the outer shield tubing.

所有跟帖： 

• 这也许是关键点。 我会去再检查一下。 谢谢。 -十万个怎么办- ♀ 给 十万个怎么办 发送悄悄话 (0 bytes) () 05/22/2010 postreply 12:49:00

• Another suggestion -心字头上一把刀- ♂ 给 心字头上一把刀 发送悄悄话 (485 bytes) () 05/22/2010 postreply 13:02:54

• 好建议。这也正是我下一步想做的事。 -十万个怎么办- ♀ 给 十万个怎么办 发送悄悄话 (0 bytes) () 05/22/2010 postreply 13:18:26

请您先登陆，再发跟帖！