It's theoratically doable but

I use braided stainless steel hoses for refeg in my home, which secures burst free. Applied that to cars,

1) I am not sure you can buy a brake line with braided stainless steel, where did you see it?
2) The brake line is high presure and heat resistance line, I do not think you can make it yourself. There is a federal law specifying what kind of license is required for a shop to make it;
3) Brake reliability is life critical thing, do not mess with it if you are 100% sure what you are doing;
4) If you really want to do it, make sure bleed the lines aftermath.

Good luck

所有跟帖： 

• 回复：It's theoratically doable but -cire622- ♂ (622 bytes) () 05/27/2006 postreply 21:02:53

• If you don't brake hard enough to boil fluid... -BigV8- ♂ (103 bytes) () 05/28/2006 postreply 01:06:34

• 回复：If you don't brake hard enough to boil fluid... -cire622- ♂ (678 bytes) () 05/28/2006 postreply 08:59:01

• You don't want to replace SS lines in your case. -BigV8- ♂ (454 bytes) () 05/28/2006 postreply 10:32:21

• 回复：You don't want to replace SS lines in your case. -cire622- ♂ (212 bytes) () 05/28/2006 postreply 18:03:04

• 回复：回复：You don't want to replace SS lines in your case. -cire622- ♂ (22 bytes) () 05/28/2006 postreply 18:06:13

• I like this car... Bule color? -BigV8- ♂ (351 bytes) () 05/29/2006 postreply 09:13:12

• Your brake sponge-like feeling isn't caused by the hose -piston- ♂ (114 bytes) () 05/28/2006 postreply 10:43:32