Questions about IDE connection.

来源: NaCl 于 2007-12-14 13:47:13 [] [旧帖] [给我悄悄话] 阅读数 : (460 bytes)

Is it possible to use one IDE header to connect an IDE hard drive and a DVD drive? If so, who should be the master or slave? What could be the problems if doing so?

I am looking at a new motherboard which has both SATA and IDE connectors. I have an old (but healthy) IDE drive (60 G) and a new SATA drive (500 G). Should I install the system on IDE or SATA? Does it really make a huge difference in terms of performance?

Thanks.



所有跟帖： 

• ide跳线只要把master与slave区分来两种都可以，新机器的 -jinyi- ♀ 给 jinyi 发送悄悄话 (119 bytes) () 12/14/2007 postreply 14:57:43

• 回复：Questions about IDE connection. -肝肠寸断散- ♂ 给 肝肠寸断散 发送悄悄话 (271 bytes) () 12/14/2007 postreply 16:39:07

• 盐兄，SATA和ATA的性能不可同日而语.... -π- ♂ 给 π 发送悄悄话 (405 bytes) () 12/14/2007 postreply 17:02:16

• SATA并不一定比PATA明显快。 -墨斗鱼- ♀ 给 墨斗鱼 发送悄悄话 墨斗鱼 的博客首页 (462 bytes) () 12/14/2007 postreply 17:37:01

• my opinion -vtcc- ♂ 给 vtcc 发送悄悄话 (539 bytes) () 12/14/2007 postreply 18:08:04

• 一快一慢的两个设备挂在同一ATA数据线上，快设备不会因此变慢。 -墨斗鱼- ♀ 给 墨斗鱼 发送悄悄话 墨斗鱼 的博客首页 (314 bytes) () 12/14/2007 postreply 20:40:13

• 60G? 就别当硬盘用啦 -砖头哥- ♀ 给 砖头哥 发送悄悄话 (136 bytes) () 12/14/2007 postreply 20:21:21

• 感谢各位各抒己见，获益匪浅，各位不愧高手之称谓 -NaCl- ♂ 给 NaCl 发送悄悄话 (0 bytes) () 12/14/2007 postreply 20:30:30

请您先登陆，再发跟帖！