DIY: Christmas Window Display

1. Arduino projects:

With Arduino UNO:

 

Materials:

Arduino Uno V3, 5 pieces

Display RGB LED boards or stripes:

A & C (on the picture above): RGB LED 5050, 1 meter strip (60 RGB LEDs), 2 pieces

B: Fibonacci256 v3.1 board from evilgeniuslabs.com, 1 piece

D: RGB LED 5050, WS2812B ring panel (1 ring, 15 RGB LEDs). 1 piece (D is not an Arduino project, it is the second project, check project 2 below please)

E: RGB LED 5050, WS2812B 8x32 matrix (256 RGB LEDs), 1 piece

F: RGB LED 5050, WS2812B ring panel (5 rings, 128 RGB LEDs). 1 piece

 

Power supply DC 9 V, 2 A, the DC plug 5.5x2.1 mm, 5 pieces

Power supply of item D is 5 V, 1 A

Programs:

    Choose sample programs from downloads

Methods: 

     https://blog.wenxuecity.com/myblog/40376/202308/172.html

 

RGB LED 5050 strips and matrix:

 

Arduino UNO  V3 and pixelblaze boards (D on the first picture):

Power supply I used:

2. 

This project is from a  control board (for D on the first picure with letters),  D is RGB LED 5050, WS2812B ring panel (1 ring, 15 RGB LEDs).

Its control board is pixelblaze v2 is from electromage.com

You use your own WIFI to run a program from the pixelblaze.com.

The control board:

Power supply 5 V, 1 A.

 

3.

Respbarry Pi 4 project:

 

Materials:

RGB LED matrix, 64x64 pixels, P3,  9 pieces. the resolution of the display is 192x192 pixels.

The matrix display boards:

Raspberry Pi 4 board:

Power supply, made of a PC AT power supply:

Operating system: Linus

method:

https://blog.wenxuecity.com/myblog/40376/202305/9249.html

 

所有跟帖： 

• 谢谢大家，还有谢谢江南一朱。 -xia23- ♂ (0 bytes) () 12/10/2023 postreply 03:53:54

• 夏兄谢多多：） -江南一朱- ♀ (0 bytes) () 12/11/2023 postreply 14:52:17