俺现了大丑,气死了,望大家借鉴失败教训。

来源: zhang88 2015-04-17 08:52:39 [] [博客] [旧帖] [给我悄悄话] 本文已被阅读: 次 (1379 bytes)
俺现了大丑,气死了,望大家借鉴失败教训。
Flat Tire-My Most Embarrassing Moments,Unbelievable, I'm Shocked
I am pretty handy and resourceful but I have to admit my recent most embarrassing moments. Although I've had many flat tires in the past, I was surprised and shocked at how little I knew about my new Nissan Leaf.

This is the story: our new Nissan Leaf (a newly leased car) got a flat tire in the middle of a parking lot. So, not the first time, just calmly figure out what to do, right? But then I noticed both left and right had earth moving equipment moving in. and realized that the parking lot was going through construction and renovation. Now I was under pressure just to move the car to somewhere else. Still, not a big deal, just a flat tire, right? Wrong again. Now I am sharing my mistakes with you so that you do not have to make the same ones. Certainly I wish someone told me this (before my flat tire accident).

I am grateful to the construction team, if you are watching and smiling, who did not bulldoze or even tow my car, and in fact were both patient and helpful.:]

所有跟帖: 

租赁车就是麻烦,好在尼桑叶子租赁起来很划算。多谢分享。那轮胎不能自己用补胎橡胶条补吗? -色大胆小- 给 色大胆小 发送悄悄话 色大胆小 的博客首页 (0 bytes) () 04/17/2015 postreply 09:51:02

不能补,是侧面蹭的。 -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/17/2015 postreply 10:09:42

原来如此,安全隐患。 -色大胆小- 给 色大胆小 发送悄悄话 色大胆小 的博客首页 (6 bytes) () 04/17/2015 postreply 10:18:59

没有试,我想,应该要一个平面的。 -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/17/2015 postreply 10:22:19

在那样的紧急情况下,我认为不妨一试。只要起码有两个是接近轮盘直径方位,而不是三孔都集中在轮盘同一边 -色大胆小- 给 色大胆小 发送悄悄话 色大胆小 的博客首页 (0 bytes) () 04/17/2015 postreply 10:27:19

当时脑子木了,dealer还没有tire in stock,N种方法不知哪个好。施工的还有压力。 -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (102 bytes) () 04/17/2015 postreply 10:35:19

如果是我,我会把右后轮换到前面,慢慢地开走。一次从儿子学校回来,发现后轮完全没气,找了条平路开回家。打足气,没事。仿效后果自负。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/17/2015 postreply 23:51:40

完全没气是什么原因 ? -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/18/2015 postreply 11:07:49

不清楚。怀疑是急转弯引起的。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 11:34:43

通常我只在直行时开得快,转弯尽量缓和避免轮胎横向受力。那天特殊情况。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 11:39:06

完全没气会不会把rim搞坏? -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/18/2015 postreply 12:23:02

车子前面重,又只有我一个人。我赌瘪了的后轮RIM不会着地。离家不远,避开speed bump. 转弯缓慢,一路开个20mph。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 12:35:42

不过你这车子看上去RIM就要着地的样子,不知换到后面会不一会好些。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 12:41:07

话说回来,高速上爆胎也是要开到路边或下高速,没听说RIM也坏了。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 12:44:31

我说的只是个人经历,仿效后果自负。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/18/2015 postreply 12:45:59

我总想RIM像刀子一样,RIM不坏也会把胎切坏。 -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/18/2015 postreply 23:24:51

我觉得高速爆胎难修是爆胎后速度太高扯坏的。所以我慢慢开回去,没坏;至少这次没有。 -周老大- 给 周老大 发送悄悄话 周老大 的博客首页 (0 bytes) () 04/20/2015 postreply 08:56:20

神回复,哈哈哈! -Oneshotkill- 给 Oneshotkill 发送悄悄话 (190 bytes) () 04/17/2015 postreply 10:42:47

同意,没想到的神。 -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/17/2015 postreply 10:46:26

How did the brake get lock? -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 (0 bytes) () 04/17/2015 postreply 11:47:39

Good question. -TBz- 给 TBz 发送悄悄话 TBz 的博客首页 (0 bytes) () 04/17/2015 postreply 12:01:18

good question, I would never imagine a compact spare not working -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/17/2015 postreply 12:05:39

but I could not see it since my wife already left, she thought t -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (127 bytes) () 04/17/2015 postreply 12:06:55

The only thing I can think of why it got locked up -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 (128 bytes) () 04/18/2015 postreply 14:36:27

I think you are right -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (0 bytes) () 04/18/2015 postreply 23:25:55

in addition, someone said the following at mynissanleaf: "Even i -zhang88- 给 zhang88 发送悄悄话 zhang88 的博客首页 (528 bytes) () 04/18/2015 postreply 23:32:11

请您先登陆,再发跟帖!