N 个绝招，怎样拧下很紧的engine oil filter

N个绝招，怎样拧下很紧的engine oil filter
Most times the engine oil filter is not too hard to remove, but occasionally you may encounter a very difficult one. When that happens, if you can't locate your best special oil filter wrench or you don't have another driveable car to run to the store, this video should help you. It would be nice if you can make use of the tools you already have in your garage. Depending on what items you have and the kind of car you have, I will show you 4 different ways to remove a stuck engine oil filter. Again it should not cost you much. Note that your garage may have somewhat different items, in which case my video will inspire you to find your own solutions.
https://youtu.be/QPVs03aZjmc

所有跟帖： 

• If you are going to do it, then do it right the first time -车遭殃- ♂ (1361 bytes) () 03/31/2015 postreply 10:09:47

• 有这必要吗？ -MoonRiverMe- ♂ (0 bytes) () 03/31/2015 postreply 11:22:58

• 你要是已经有了，就没有必要。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:05:33

• 精神可嘉，方法欠佳 -MoonRiverMe- ♂ (39 bytes) () 03/31/2015 postreply 17:38:52

• filter wrench is not expensive. why make one by your self -PtLandlord- ♂ (0 bytes) () 03/31/2015 postreply 11:34:19

• if you can't find one, or if you see other people doing wrong th -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:08:03

• 视频中的那位，纯粹是吃饱撑的。 -kgb55455- ♂ (0 bytes) () 03/31/2015 postreply 11:59:55

• 买个oil filter cap就好了 walmart卖一个3刀 -violinpiano- ♂ (61 bytes) () 03/31/2015 postreply 13:05:24

• 对，要买我视频里的那种有两种尺寸的。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:11:09

• 这种态度干活。不是弄坏东西，就是自己受伤。我觉得不宜提倡。 -yanif- ♂ (0 bytes) () 03/31/2015 postreply 13:10:47

• 同意，见到很多人光用手拧，把手划伤。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:13:44

• 你见过很多人拧这个把手划伤？ -TBz- ♂ (99 bytes) () 03/31/2015 postreply 15:31:34

• 非常紧的，就划伤 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:40:03

• 不错，学习了 :-) -色大胆小- ♂ (0 bytes) () 03/31/2015 postreply 13:21:41

• 学会使用正确的工具干活非常重要 -PtLandlord- ♂ (0 bytes) () 03/31/2015 postreply 14:11:16

• 同意。这只是在没有条件下的下策。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 15:16:24

• 帽式打滑的时候，换成一个卡钳基本都可以解决问题。现在工具很便宜，别费那个神了。而且不安全。 -T98Kombat- ♂ (0 bytes) () 03/31/2015 postreply 16:02:16

• 对，方法很多，不要一招不灵就傻眼了，要有N招。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 16:06:57

• 没办法的时候值得借鉴。 -毅然- ♂ (0 bytes) () 03/31/2015 postreply 18:07:29

• 感觉您还是在国内六七十年代修修补补的精神状态：）））没恶意，开个玩笑。 -史迷- ♂ (200 bytes) () 03/31/2015 postreply 19:01:27

• 八十年代，有1次纹丝不动，还是一个老美教我用改锥。 -zhang88- ♂ (0 bytes) () 03/31/2015 postreply 22:55:08