Actually it is not too bad, just takes some time.

Before you start to relace the head gasket, double check the valve cover to see if there is any crack.  And make sure you have tightened the valve cover bolts to the specific torque.

Based on your description of what you have done, you should have enough skill to replace the head gasket. Have fun.

所有跟帖: 

thanks. -乱猜- 给 乱猜 发送悄悄话 (0 bytes) () 12/02/2010 postreply 06:50:20

请您先登陆,再发跟帖!