the design is stupid, the Allen key size is so small that the hex hole gets easily torn up. I guess there is nothing to lose to drill out the screw and part of the handle. You will need a new handle, about 20 dollars.
I had similar problem also with Delta.
所有跟帖:
•
从handle 根部锯断,别损伤了handle,割下后再试一下能否把六角螺杆拧出来。用torch 烧一下,一般能取出来。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
14:03:41
•
这很难做到,从把手和面板的缝里锯。而且CATRIDGE那个轴是很硬的金属,不像把手是铝的或是铜的。就别在乎把手那几个钱了
-borisg-
♂
(0 bytes)
()
02/01/2025 postreply
14:28:19
•
不应在乎。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
15:29:42
•
电锯割比较粗暴,但是我常用的手段。换sink faucet 懒得钻底下拧螺丝,直接从上面锯掉,或用锤子砸掉。
-QinHwang-
♂
(0 bytes)
()
02/01/2025 postreply
16:21:20
•
get a basin wrench...
-borisg-
♂
(0 bytes)
()
02/01/2025 postreply
16:22:08