spare nut改软管

所有跟帖： 

• 多谢老兄建议，立刻去了Ace hardware -jasonshane- ♂ (331 bytes) () 02/17/2019 postreply 18:12:16

• 螺纹上绕5圈teflon tape后再试试。 -易木- ♂ (0 bytes) () 02/17/2019 postreply 18:28:52

• 还是不行 -jasonshane- ♂ (498 bytes) () 02/17/2019 postreply 19:29:57

• 这里的问题是, 不能用npt, which is taper pipe thread. You want straight pi -PrimeryColor- ♀ (0 bytes) () 02/18/2019 postreply 09:41:26

• ??? -jasonshane- ♂ (130 bytes) () 02/18/2019 postreply 17:07:55

• There are 2 pipe threads, taper and straight, 铜接头是前者npt, 3通是后者n -PrimeryColor- ♀ (209 bytes) () 02/18/2019 postreply 18:34:46

• 多谢指教 -jasonshane- ♂ (50 bytes) () 02/18/2019 postreply 21:31:32

• 方案2 -PrimeryColor- ♀ (522 bytes) () 02/18/2019 postreply 07:52:04

• 还真有这种规格的 -jasonshane- ♂ (68 bytes) () 02/18/2019 postreply 08:48:22