Better disk performance


RAID-0

RAID Level 0 is not redundant, hence does not truly fit the "RAID" acronym. In level 0, data is split across drives, resulting in higher data throughput. Since no redundant information is stored, performance is very good, but the failure of any disk in the array results in data loss. This level is commonly referred to as striping.

所有跟帖: 

thanks! -鸡毛蒜皮- 给 鸡毛蒜皮 发送悄悄话 (0 bytes) () 09/14/2005 postreply 17:39:55

请您先登陆,再发跟帖!