I think the setting is wrong..

来源: 3.1416 于 2004-12-19 18:33:39 [] [旧帖] [给我悄悄话] 阅读数 : (633 bytes)

It is very possible that the disk you added were recognized as the boot disk. As you said that "disk 1" and "disk 2" -- I do not know how you configured it. Most of the "cable select" cable marked "drive 0" and "drive 1" where the drive 1 is the secondary drive. Pleae check that.

The other possibility is that you have installed the OS to boot from drive D and when you added the new drive, the drive D will be assigned to the now drive automatically (of course you may change the drive assignment in OS, but first of all you need to boot it.) This could be one of the reasom for the failure.

Good luck!

所有跟帖： 

• 回复：I think the setting is wrong.. -NeedHelp1- ♀ 给 NeedHelp1 发送悄悄话 (934 bytes) () 12/19/2004 postreply 21:13:36

请您先登陆，再发跟帖！