check the jumper settings

来源: QED 于 2004-11-15 06:31:14 [] [旧帖] [给我悄悄话] 阅读数 : (169 bytes)

Is it right that you have replaced the old drive a new one? On the new drive you have teh choice of MASTER, SLAVE and CABLE SELECT, you have to set the jumper to MASTER.

所有跟帖： 

• Try to set it SLAVE as well -QED- ♀ 给 QED 发送悄悄话 (0 bytes) () 11/15/2004 postreply 07:09:09

请您先登陆，再发跟帖！