回复：I set to Cable select, it is

来源: 要注意 于 2004-11-04 11:47:01 [] [旧帖] [给我悄悄话] 阅读数 : (184 bytes)
回答: you need to set the jumper 由 correctly 于 2004-11-04 05:36:46

If you connect both hard drives on the same IDE cable then both hard drives have to be set to CS. This way the system will assume the hard drive on the end of the cable is the primary.

请您先登陆，再发跟帖！