用google查过没有？

Microsoft Knowledge Base Article - 245184

NTVDM CPU Has Encountered an Illegal Instruction
View products that this article applies to.
This article was previously published under Q245184
SYMPTOMS
When you attempt to run a 16-bit program on a computer running Microsoft Windows NT 4.0 Service Pack 3, the program may quit immediately, or you may receive the following error message:
Hidden Console of WOW VDM
The NTVDM CPU has encountered an illegal instruction.
CS: 04c3 IP:3937 OP:c71c 9d 37 00
Choose Close to terminate the application.
When you click Close, you may receive several similar error messages.
CAUSE
This behavior can occur if you use an incorrect version of the Command.com file. For example, this issue is known to occur if you use a Command.com file included in Microsoft Windows 95, dated 7/11/95.
RESOLUTION
To resolve this issue, replace the Command.com file in the Winnt\System32 folder with the same file from another computer that is running Windows NT Workstation 4.0 or Windows NT Server 4.0, and then make sure that there are no Command.com files dated 7/11/95 on the computer. You can also replace the Command.com file on the computer with the same file on the Windows NT installation CD-ROM.
The information in this article applies to:

* Microsoft Windows NT Server 4.0
* Microsoft Windows NT Workstation 4.0

Last Reviewed: 8/27/2002 (1.0)
Keywords: kbprb KB245184

http://support.microsoft.com/default.aspx?scid=kb;en-us;245184

http://www.google.ca/search?hl=en&ie=UTF-8&q=NTVDM+CPU+Has+encountered+an+illegal+instruction&spell=1

所有跟帖： 

• 谢谢，可是从哪找到干净的command.com我找不到 -笔记本带的光盘了:(- ♀ (64 bytes) () 06/27/2004 postreply 07:45:56

• 已经替换了，可是问题依旧。。。 -好像是interne- ♀ (28 bytes) () 06/27/2004 postreply 12:03:15

• 那是旧版nt4.0以前dos下的文件 -直接删了！！- ♀ (0 bytes) () 06/27/2004 postreply 14:26:49

• 没用，自己还出 -无语了。。。。- ♀ (0 bytes) () 06/27/2004 postreply 14:36:34