以VoIP.ms为例

来源: slow_quick 于 2013-06-27 10:11:13 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (1706 bytes)
回答: 谢谢！如果要设置的话从哪里入手？ 由 Hope_2007 于 2013-06-27 09:07:30

以VoIP.ms为例（其他供应商雷同）
1. 上VoIP.ms注册个账户，交钱（VoIP.ms一次最少25美刀），记下user name, password, voip server，比如说
user: 123456
password: pswd_slow_quick
server: losangeles.voip.ms (有许多可选，就选靠近的那个)
leave the portal/home page open so you can see if your OBi100 is registered with VoIP.ms in the next

2. login to OBiTalk, click the OBi100 icon in "My OBi Endpoints", In Configure Service Provider Accounts, select voip.ms (or your choice, or if not in the list, Generic Service Provider), fill in the information, submit.
Go back to the portal/home page of VoIP.ms to confirm that your device is talking to VoIP.ms server (will show registered device)

3. Make a test phone call: **2 followed by phone number (say, 01186xxx...)
If you do not want to mess with the device configuration, stop here. You can dial international with **2 followed by 001+country code+...

If you want to get your hands dirty:
4. Now the fun part:
login to OBiTalk again, click the OBi100 icon in "My OBi Endpoints" to get into configuration,
Click OBi Expert Configuration, then Enter OBi Expert,
look for Phone OutboundCallRout, uncheck OBiTalk Settings, and then in the value field, add the following at the beginning of existing string
{(011xxx.):sp2},
Do not miss the last ",".
It means, if the dialed number starts with 011, followed by three or more digits, dial out using SP2 (service provider 2).
Submit the change.  If you messed up, don'w worry, click on Clear Changes or Revert All to OBiTalk Settings.

所有跟帖： 

• Thanks so much -- man, you are the expert! -Hope_2007- ♂ 给 Hope_2007 发送悄悄话 (0 bytes) () 06/27/2013 postreply 10:18:23

• 不谢。号转成了分享一下经验 -slow_quick- ♂ 给 slow_quick 发送悄悄话 slow_quick 的博客首页 (0 bytes) () 06/27/2013 postreply 10:22:02

• It works! I can call China with Rynga for fee now. Thanks a mill -GuoLuke2- ♂ 给 GuoLuke2 发送悄悄话 GuoLuke2 的博客首页 (0 bytes) () 06/27/2013 postreply 13:06:51

• I mean "for free". Thanks a millon! -GuoLuke2- ♂ 给 GuoLuke2 发送悄悄话 GuoLuke2 的博客首页 (0 bytes) () 06/27/2013 postreply 13:08:10

• 赶紧写下过程让大家分享 -slow_quick- ♂ 给 slow_quick 发送悄悄话 slow_quick 的博客首页 (0 bytes) () 06/27/2013 postreply 13:58:51

• Using Rynga -Guoluke2- ♂ 给 Guoluke2 发送悄悄话 Guoluke2 的博客首页 (745 bytes) () 06/27/2013 postreply 15:23:25

• 对不起，rynga不是真正免费,只打了两个很短的电话。 -GuoLuke2- ♂ 给 GuoLuke2 发送悄悄话 GuoLuke2 的博客首页 (33 bytes) () 06/27/2013 postreply 18:15:56

请您先登陆，再发跟帖！