实际上你要定义两个port forwarding,除了port range外,别的都选default。 第一个应该选UDP
Protocol: TCP *UDP
Port (or Range): From: 16384 to 16482
Protocol Timeout (seconds):
Map to Host Port:
Default = the same port as defined above.
Application Type: None
第二个是 port range 是5060 到5061,
Protocol: TCP *UDP
Port (or Range): From: 5060 to 5061
Protocol Timeout (seconds):
Map to Host Port:
Default = the same port as defined above.
Application Type: None
每一个定义都要取一个名字。然后加到SipuraSPA下面。再到Firewall summary 看看SipuraSPA后面是不是有这两个名字。
回复:Router porting problem:我的router is 2wire Gateway,
所有跟帖:
•
回复:回复:Router porting problem:我的router is 2wire Gateway,
-houston1997-
♀
(88 bytes)
()
12/24/2009 postreply
15:02:00
•
不要选别的,只选你定义的。
-出入自在-
♂
(0 bytes)
()
12/24/2009 postreply
15:04:06