Netgear wireless router help!

来源: bluepebble 于 2003-09-13 08:30:00 [] [旧帖] [给我悄悄话] 阅读数 : (474 bytes)
本帖于 2004-02-06 15:24:48 时间, 由普通用户 old-cotton 编辑

When I installed MR314 and linked my computer to it using MA101, everything worked fine. I use DHCP so my computer has a IP address of 192.168.0.3. However, after a while, one day when I start the computer, I found the IP address was changed to 192.168.2.x. Although I can still browse the internet, I can never connect to MR314's admin page. Port forward doesn't work either because the IP address was changed. Could any expert here tell me how to fix this? Thanks so much!



--文学城www.wenxuecity.com--

所有跟帖： 

• 看一下手册中有无提到如何动态分配IP使之与网卡MAC地址对应 -^@^,,)~- ♀ 给 ^@^,,)~ 发送悄悄话 (0 bytes) () 09/13/2003 postreply 09:25:00

• 或者关掉DHCP直接用静态IP不就结了 -?- ♀ 给 ? 发送悄悄话 (0 bytes) () 09/13/2003 postreply 09:49:00

• 回复：Netgear wireless... -NetLooker- ♀ 给 NetLooker 发送悄悄话 (337 bytes) () 09/13/2003 postreply 09:56:00

• haha, that's funny -?- ♀ 给 ? 发送悄悄话 (0 bytes) () 09/13/2003 postreply 10:29:00

• Thanks, I think that should be -bluepebble- ♀ 给 bluepebble 发送悄悄话 (237 bytes) () 09/13/2003 postreply 16:24:00

请您先登陆，再发跟帖！