回复：是这样的, 我现在在新盘上要装WINDOWS2000

来源: FQDN 于 2003-12-07 20:42:00 [] [旧帖] [给我悄悄话] 阅读数 : (360 bytes)
本帖于 2004-02-06 15:24:48 时间, 由普通用户 old-cotton 编辑

1. Set the 120GB as master;
2. Set the old one as slave;
3. configure the BIOS to boot from CD-rom;
4. Place the Win2k CD in the CD-ROM;
5. Your PC will boot from WIN2K CD;
6. Follow the instruction on the screen.
If everything goes smoothly and you does not partition your new HD, after the installation, your new HD will be C:
Good luck!



--文学城www.wenxuecity.com--

所有跟帖： 

• This is the best way -watersdai- ♀ 给 watersdai 发送悄悄话 (0 bytes) () 12/08/2003 postreply 17:51:00

请您先登陆，再发跟帖！