曾见有人讲,在车道上用多个支架支撑车辆,结果邻居喝醉了轻轻撞了一下。。。。突发地震呢?who can who up.

本帖于 2025-05-14 20:50:20 时间, 由普通用户 Oneshotkill 编辑
回答: 请教个floor jacks and jack stands 的问题?老车2025-05-14 19:08:17

打嘴炮向来不乏人头,命是自己的,who life who care哈哈嘻嘻汗

所有跟帖: 

Using multiple jack stands is an invitation -jassco- 给 jassco 发送悄悄话 (22 bytes) () 05/14/2025 postreply 20:57:14

我可能就是想支起前边两个轱辘,换机油,换刹车等基本维护。 -老车- 给 老车 发送悄悄话 (176 bytes) () 05/15/2025 postreply 07:09:11

最佳方案是木头坡,使用支架的话,最好在LCA或BJ处垫实木墩,有条件在支架附近辅以实木墩【有人放轮胎,我不是很喜欢】。 -Oneshotkill- 给 Oneshotkill 发送悄悄话 (228 bytes) () 05/15/2025 postreply 07:43:03

谢谢老哥,这个实木墩(6x6x12,备份支撑)我可以在homedepot买木头做。 -老车- 给 老车 发送悄悄话 (266 bytes) () 05/15/2025 postreply 09:36:30

轮胎上面再放2x4 和 2x6 木条就可以把那一小段距离填上了。 -Shubin- 给 Shubin 发送悄悄话 Shubin 的博客首页 (0 bytes) () 05/15/2025 postreply 17:09:03

好主意!谢。 -老车- 给 老车 发送悄悄话 (0 bytes) () 05/15/2025 postreply 18:34:50

如果只是换机油和刹车,觉得支起一个轮子就可以了,其余3个轮子需要用木方顶紧避免移动。 -Shubin- 给 Shubin 发送悄悄话 Shubin 的博客首页 (0 bytes) () 05/15/2025 postreply 09:15:09

好,多谢。 -老车- 给 老车 发送悄悄话 (0 bytes) () 05/15/2025 postreply 09:37:02

换机油换闸只需要支一个。 -biglow- 给 biglow 发送悄悄话 biglow 的博客首页 (0 bytes) () 05/15/2025 postreply 12:39:04

呵呵, 说起地震....... -iGarage- 给 iGarage 发送悄悄话 iGarage 的博客首页 (622 bytes) () 05/15/2025 postreply 18:52:36

OMG, 亿万分之一的机率 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (0 bytes) () 05/15/2025 postreply 21:53:03

您当时有没有去买一注彩票? -wibblypig0- 给 wibblypig0 发送悄悄话 wibblypig0 的博客首页 (0 bytes) () 05/16/2025 postreply 05:56:31

四个3吨的 jackstands do not -jassco- 给 jassco 发送悄悄话 (40 bytes) () 05/17/2025 postreply 12:46:09

请您先登陆,再发跟帖!