Honda civic 2013 spark plug replaced

easy peasy replacing spark plug 2013 Honda civic, no valve cover removal, just straight to the coil ignition, take out the plug, put the new one in, and be done w it.
IN between: I had to decide to hell disregard the specialty socket that has the rubber protection, it is long ago I can’t find it; just be careful not to be idiot to break the ceremic top of the plug. I did the anti seize and the lubricant for coil connection. DO NOT OVER TIGHT THE PLUG.
car drives usual that I hope better mpg.

所有跟帖： 

• 雕虫小技 -MoonRiverMe- ♂ (15 bytes) () 01/26/2025 postreply 04:40:13

• 不需要换 -chinomango- ♂ (0 bytes) () 01/26/2025 postreply 20:52:09

• glad I did it as the car has 120k miles and never replaced the p -leslieking- ♂ (0 bytes) () 01/27/2025 postreply 09:25:00

• 以前在11万哩时换了火花塞，都是铱合金的，没感觉有前后差别，后来听说有人18万喱也没事，照开 -khyang86- ♂ (0 bytes) () 01/27/2025 postreply 21:30:23

• LZ贴里的照片明显显示旧火花塞的gap大，对ignition coil不好。 -成功的熊- ♂ (0 bytes) () 01/28/2025 postreply 10:45:54

• gap大点，自己个儿调调不就得了？楼主的旧火花塞除了间隙，看上去没啥大毛病，又不赛车 -mountrobson- ♂ (0 bytes) () 01/28/2025 postreply 12:48:09

• +1,况且高压脉冲前沿很陡的 -chinomango- ♂ (0 bytes) () 01/28/2025 postreply 18:57:45

• 你得看是啥材料 -MoonRiverMe- ♂ (119 bytes) () 01/28/2025 postreply 20:03:47

• 小题大做 -mountrobson- ♂ (0 bytes) () 01/29/2025 postreply 11:21:49

• 大题小做还是小题大做厂家自有其道理 -MoonRiverMe- ♂ (135 bytes) () 01/29/2025 postreply 17:08:29

• 比较关键是拧到多紧。我个人经验是用1/4 drive的torque wrench。能明显感到垫片开始吃力，然后再转 -成功的熊- ♂ (441 bytes) () 01/28/2025 postreply 10:59:25

• I always tighten it to spec torque -MoonRiverMe- ♂ (0 bytes) () 01/28/2025 postreply 20:06:22

• scary to do anything right ;(. happy new year everyone. -leslieking- ♂ (0 bytes) () 01/28/2025 postreply 18:57:00