This is called Retorqueing,50-100 KM after installing tires,

it not only checks if Lug nuts are too loose,  also checks if too tight,  standard process is, loosen nuts, torqure to specs again.

所有跟帖： 

• That’s absolutely the right way to do it -MoonRiverMe- ♂ (180 bytes) () 11/01/2023 postreply 11:16:10

• +1, ensure tire still touch ground so you can torque -mountrobson- ♂ (80 bytes) () 11/01/2023 postreply 13:03:03

• 不大可能，5K就该shift了，还50-100KM再拧紧？ -chinomango- ♂ (0 bytes) () 11/02/2023 postreply 12:12:47

• 换胎后，开50到100公里，重新检查LugNuts的Torque, 有问题吗？ -mountrobson- ♂ (0 bytes) () 11/03/2023 postreply 08:17:39

• 没问题我看错了 -chinomango- ♂ (0 bytes) () 11/12/2023 postreply 16:55:43