如何测量发电机整流器?(卸开后)

来源: chinomango 2021-11-24 19:38:30 [] [博客] [旧帖] [给我悄悄话] 本文已被阅读: 次 (0 bytes)
本文内容已被 [ chinomango ] 在 2021-11-24 20:12:04 编辑过。如有问题,请报告版主或论坛管理删除.

所有跟帖: 

就是个整流桥, 测二极管是否击穿 -bushihandyman- 给 bushihandyman 发送悄悄话 bushihandyman 的博客首页 (0 bytes) () 11/24/2021 postreply 20:23:59

可测量整流堆的4个二级管。通常可更换。我换过 -not_a_fan8- 给 not_a_fan8 发送悄悄话 (0 bytes) () 11/25/2021 postreply 13:57:28

1/3组线圈不通?在线等答 -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (935846 bytes) () 11/25/2021 postreply 14:38:21

用电表量diode看是不是只有一个方向通就行了嘛,两个方向都通或不通就是死掉了嘛 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (0 bytes) () 11/25/2021 postreply 16:05:18

12个整流管没有坏,电刷磨掉1.5mm还有4mm,内部模块不知道 -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 11/25/2021 postreply 16:36:47

看了一下我的旧的换下来的 rectifier(6 diodes)。 除了diodes 可能被烧坏 (我的有两个坏了),其他 -not_a_fan8- 给 not_a_fan8 发送悄悄话 (129 bytes) () 11/25/2021 postreply 20:05:22

我的发电机上另有四芯插座,可能涉及稳压器,见我的框图-网上找的很不清楚 -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 11/26/2021 postreply 10:56:47

https://opensiuc.lib.siu.edu/cgi/viewcontent.cgi?article=1011&co -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 11/27/2021 postreply 08:20:00

请您先登陆,再发跟帖!