想学body repair,有啥好介绍的吗?知道原理但细节工艺缺乏

本帖于 2020-10-07 20:45:26 时间, 由普通用户 chinomango 编辑

车子被别人撞高速刮的

所有跟帖: 

俺的经验 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (131 bytes) () 10/07/2020 postreply 23:59:43

You will need a good paint gun with a compressor. (NT) -jassco- 给 jassco 发送悄悄话 (0 bytes) () 10/08/2020 postreply 10:33:09

spray can works resonably well with some practice -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (0 bytes) () 10/08/2020 postreply 10:44:47

散面不够大因此难以均匀,有啥窍门吗? -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 10/09/2020 postreply 09:41:39

一道道扫过,后一道覆盖前一道的一半,气温在65F以上,湿度也有要求 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (78 bytes) () 10/09/2020 postreply 10:27:20

it seems need a high volume compressor, I only have a mid size o -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 10/08/2020 postreply 14:18:30

发现有LPLV喷枪,几年前是没有的 -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 10/09/2020 postreply 09:43:16

黑色和金色的车用什么颜色的Primer?有无面积很小的砂纸或砂纸机? -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 10/08/2020 postreply 20:46:09

啥颜色不重要,你接下来的base coat要把它盖住 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (197 bytes) () 10/09/2020 postreply 11:14:24

看看俺的成果 -MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (423 bytes) () 10/09/2020 postreply 11:27:44

喷罐?很好了 -chinomango- 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 10/09/2020 postreply 18:28:37

-MoonRiverMe- 给 MoonRiverMe 发送悄悄话 MoonRiverMe 的博客首页 (0 bytes) () 10/09/2020 postreply 19:39:44

请您先登陆,再发跟帖!