应购买什么样的Jack & jack stands？

对于full size pickup truck，应该买几吨的Jack & jack stands?对于jack stands，这个吨位是两个一起算的吧？谢谢。

所有跟帖： 

• 前几年99刀3吨的Costco铝顶不错【6000lb以下空重】,支架HF铝制的好像三几十刀,3-4吨?忘记了 -Oneshotkill- ♂ (0 bytes) () 05/14/2019 postreply 20:39:12

• 对于皮卡，三顿够不够？ -ProfessionalEngineer- ♂ (0 bytes) () 05/14/2019 postreply 20:46:50

• 3吨不仅承重不够，高度也不够。 -TheHawk- ♂ (0 bytes) () 05/14/2019 postreply 22:34:50

• 应该买几吨？几高？ -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 05:30:58

• 6吨，max lift height > 22in -TheHawk- ♂ (0 bytes) () 05/15/2019 postreply 11:21:53

• Thanks -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 15:49:40

• 前几天买了一个1.5T的，迷你van 用。 -落城一哥- ♂ (0 bytes) () 05/14/2019 postreply 22:42:58

• 是一对吧？那就算3吨，我的理解 -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 05:32:29

• 一个对我来说够用 -落城一哥- ♂ (0 bytes) () 05/15/2019 postreply 08:13:22

• homedepot 100刀能搞到12吨钢架结构。单个该有6吨支撑力了。 -needtime- ♂ (96 bytes) () 05/15/2019 postreply 05:54:55

• thanks -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 10:23:44

• 俺用HF的3吨铝floor jack和6吨的stands. -傻闷登儿- ♂ (46 bytes) () 05/15/2019 postreply 07:59:06

• 是皮卡吗？ -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 10:22:26

• full size SUV，pickup应该没问题。再往上，俺也只看到4吨的了。要不你就买4吨的。 -傻闷登儿- ♂ (0 bytes) () 05/15/2019 postreply 14:59:47

• Thanks! -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 15:49:58

• 3 ton jack should be enough. For jack stands, -jassco- ♂ (85 bytes) () 05/15/2019 postreply 19:13:16

• yes 6 ton for a pair. thanks. -ProfessionalEngineer- ♂ (0 bytes) () 05/15/2019 postreply 19:27:30

• 3ton jack stand is enough, each only takes 30% of car weight -chinomango- ♂ (0 bytes) () 05/16/2019 postreply 21:07:16

• this is 99ton :) -zhang88- ♂ (300 bytes) () 05/18/2019 postreply 21:02:16