-
Sparhawk
- Posts: 1
- Joined: Sun Aug 08, 2010 7:05 pm
- Car: 2001 Nissan Pathfinder LE
Re: 2001 Pathfinder PCV Valve
I don't know if this thread is dead or not but to answer the 64,000.00 question Here it is 
and it is right under 
and first you have to remove 
So basically you have to remove the Upper Intake wich is 13 bolts plus some wires and vacum hoses then the lower intake which is 4 bolts plus 2 on a support bracket and 4 bolts holding wire supports all to reveal this litte piece of junk that never should have been hidden under there in the first place. Not a 5 min. job. You need a torque wrench, New Gasket set and the infamous PCV Valve.
and it is right under and first you have to remove So basically you have to remove the Upper Intake wich is 13 bolts plus some wires and vacum hoses then the lower intake which is 4 bolts plus 2 on a support bracket and 4 bolts holding wire supports all to reveal this litte piece of junk that never should have been hidden under there in the first place. Not a 5 min. job. You need a torque wrench, New Gasket set and the infamous PCV Valve.
