How to Oil an Impact Wrench

来源: soccer88 于 2015-12-05 23:49:09 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (1018 bytes)

http://www.ehow.com/how_8153030_oil-impact-wrench.html

  • Disconnect the air hose from the wrench by pushing the collar fitting on the air hose away from the tool while pulling the air hose straight out of the tool.

  • Hold the tool with the air inlet -- usually located in the bottom of the hand grip -- facing upward.

  • Squeeze the trigger and hold it in.

  • Squeeze one or two drops of light motor oil into the air inlet hole.

  • Release the trigger. Wipe up any spilled oil from the exterior of the tool with a rag.




    •  
  • Read more : http://www.ehow.com/how_8153030_oil-impact-wrench.html

所有跟帖： 

• Air Tool Lubricant. -soccer88- ♂ 给 soccer88 发送悄悄话 soccer88 的博客首页 (318 bytes) () 12/06/2015 postreply 00:00:49

• 谢谢，但网上说此款不用机油用锂基油脂 -chinomango- ♂ 给 chinomango 发送悄悄话 chinomango 的博客首页 (0 bytes) () 12/06/2015 postreply 09:13:53

• Lithium grease到处都是，Walmart就有。 -biglow- ♂ 给 biglow 发送悄悄话 biglow 的博客首页 (0 bytes) () 12/06/2015 postreply 12:06:30

• 他这里应该是Thin oil, 还没有见过 -soccer88- ♂ 给 soccer88 发送悄悄话 soccer88 的博客首页 (0 bytes) () 12/06/2015 postreply 12:36:43

• 就是grease，thin oil 没有金属based -biglow- ♂ 给 biglow 发送悄悄话 biglow 的博客首页 (38 bytes) () 12/06/2015 postreply 18:15:47

请您先登陆，再发跟帖！