Update: 刚做了如下, 请帮忙分析一下子(详情见内)

1. 用scan tool 消掉CEL code.

2. Turned on engine and let it idle for 15 minutes, everything was fine.
3. Rev the engine for about 4-5 minutes, no oil light. No rpm meter on the dashboard so don't know the rpm, probably between 2k-3k.
4. Release gas paddle and let it idle, oil light turned on.
5. Rev the engine again, oil light went away, let it idle and oil light on again, rev again and light went away again...

Any idea???

Thanks...











 

所有跟帖: 

问几个基本问题 -biglow- 给 biglow 发送悄悄话 biglow 的博客首页 (192 bytes) () 12/24/2013 postreply 18:02:06

基本上每3k-5k dino+filter, 油液面高度正常 more info inside, 谢回复! -tjzsm1- 给 tjzsm1 发送悄悄话 (512 bytes) () 12/24/2013 postreply 21:29:22

VVW 和P0300可能是并发症,不能说明太多的问题 -biglow- 给 biglow 发送悄悄话 biglow 的博客首页 (192 bytes) () 12/25/2013 postreply 11:44:16

可以试一试换成 Monile 1 Synthetic, 可以帮助清 -soccer88- 给 soccer88 发送悄悄话 soccer88 的博客首页 (0 bytes) () 12/25/2013 postreply 11:57:42

回复:可以试一试换成 Monile 1 Synthetic, 可以帮助清 -坚茂- 给 坚茂 发送悄悄话 (94 bytes) () 01/04/2014 postreply 15:49:18

请您先登陆,再发跟帖!