02 到03年的transmission servo，这个修理简单

来源: soccer88 于 2013-10-02 10:50:17 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (1166 bytes)
回答: 这车也曾经和本田的波波一样 由 langxing 于 2013-10-02 10:14:05

Found it. A bad intermediate servo.
This one was the hardest to remove. The snap ring notches are tough to get to when they're at the top. After I oiled up the ring and slid it around to where I could see the notches things got a lot easier.



Here's the intermediate servo. The smaller overdrive servo was OK but I'll be replacing that too.






I used the broken off piston to check the bores. The intermediate bore seemed pretty tight.
I'll guess at a couple thousands horizontally and a little more vertically. The overdrive side was slightly tighter.




A few pictures to help out the next victim.

所有跟帖： 

• 会的不难，男的不会 -langxing- ♂ 给 langxing 发送悄悄话 (56 bytes) () 10/02/2013 postreply 11:15:30

请您先登陆，再发跟帖！