因为轮胎内侧磨损异常,本来以为要作alignment ,结果被告知engine mount 有问题了,车行演示给我看了,轰油门时确实看到engine 在上下晃悠,看着还挺严重的。
Labor 200, 让我自己去买零件。2001 passat GLS V6 FD.
车行人说是买both side.
结果去网上一看,至少发现三个东西都被称作engine mount.
不知道该买哪个了?左右各一个,中间还有一个吗?
这活自己能干吗?
谢谢。
请教关于engine mount
所有跟帖:
• engine mount是垫在engine和车架之间的4个或更多的厚胶垫,一般自己换不了。 -US_CAR.- ♂ (0 bytes) () 08/20/2013 postreply 14:02:08
• 一般上面的左右两个自己换不难, 下面的前后两个不好搞。自己看是哪个破了再做决定. -我胡说八道- ♂ (0 bytes) () 08/20/2013 postreply 18:46:44
• 居然有四个? -coorslight969- ♂ (0 bytes) () 08/20/2013 postreply 20:32:11
• 有两个可能是Trans mount -soccer88- ♂ (0 bytes) () 08/20/2013 postreply 22:55:12
• 最少有3个模块. 应该检查一下到底哪个有问题, 就换那个. 轰油门时,engine肯定晃游, 建议再确定一下是否真的engine -愉木- ♂ (0 bytes) () 08/21/2013 postreply 07:57:48
• 晃悠幅度很大的 -coorslight969- ♂ (272 bytes) () 08/21/2013 postreply 10:13:04
• 查了一下,是3个,前面中间有一个,左右各一个, -soccer88- ♂ (55 bytes) () 08/21/2013 postreply 14:53:16
• 这里是视频,注意安全了 -soccer88- ♂ (49 bytes) () 08/21/2013 postreply 15:02:54
• 谢谢!! 已经订了零件,收到再来汇报。 -coorslight969- ♂ (0 bytes) () 08/21/2013 postreply 18:34:29