除了仪表盘，还有可能是别的问题，如VSS

来源: 事后诸葛 于 2013-07-21 20:39:26 [] [旧帖] [给我悄悄话] 阅读数 : (3321 bytes)

有可能是VSS到表盘的接线不良。
还有可能是VSS， 车速感应器不工作。VSS坏的可能性比仪表盘要大得多。
因为在轮子边上震动，高，低温，水流， 等等。 工作环境恶劣。


 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com

 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com


 

Causes A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle. If everything looks OK, replace the sensor.

Read more at: http://www.obd-codes.com/p0500
Copyright © OBD-Codes.com

所有跟帖： 

• 谢谢楼上两位建议，接线不良和感受器跟换要多少费用？ -markmedown- ♀ 给 markmedown 发送悄悄话 (0 bytes) () 07/21/2013 postreply 21:37:34

• 自己修，花时间，基本不花钱。大店里多同一个答案 -- 换仪表盘。找个小店问问价钱。 -US_CAR.- ♂ 给 US_CAR. 发送悄悄话 (0 bytes) () 07/21/2013 postreply 22:03:52

• 谢谢 -markmedown- ♀ 给 markmedown 发送悄悄话 (0 bytes) () 07/21/2013 postreply 22:39:39

• 你若不能自摸，那就只能找人或找店修。 -事后诸葛- ♂ 给 事后诸葛 发送悄悄话 (169 bytes) () 07/21/2013 postreply 22:41:33

• 是我跟不上形势了还是时代变化太快， 什么是"自摸"? -老生长谈- ♂ 给 老生长谈 发送悄悄话 (0 bytes) () 07/23/2013 postreply 08:25:58

• VSS管cruise control -MoonRivertttt- ♂ 给 MoonRivertttt 发送悄悄话 (45 bytes) () 07/21/2013 postreply 23:06:51

• Okey, use cruise control to test VSS, thanks -markmedown- ♀ 给 markmedown 发送悄悄话 (0 bytes) () 07/22/2013 postreply 12:25:29

请您先登陆，再发跟帖！