换掉坏的氧气探头

来源: 满地找牙 于 2013-05-31 10:20:27 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (2632 bytes)
回答: check engine light 亮了 由 s92p 于 2013-05-31 10:16:05
P0135 OBD-II Trouble Code

Technical Description：Oxygen O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)

This code refers to the front oxygen sensor on Bank 1. The heated circuit in the oxygen sensor decreases time needed to enter closed loop. As the O2 heater reaches operating temperature, the oxygen sensor responds by switching according to oxygen content of the exhaust surrounding it. The ECM tracks how long it takes for the oxygen sensor to begin switching. It the ECM determines (based on coolant temp) that too much time elapsed before the oxygen sensor began operating properly, it will set P0135.

Symptoms

You will likely notice poor fuel economy the illumination of the MIL.

Causes

A code P0135 may mean that one or more of the following has happened:

  • O2 Heater element resistance is high
  • Internal short or open in the heater element
  • O2 heater circuit wiring high resistance
  • open or short to ground in the wiring harness

Possible Solutions

  • Repair short or open or high resistance in wiring harness or harness connectors
  • Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)

http://www.obd-codes.com/p0135


所有跟帖： 

• 大概要多少钱？ -s92p- ♀ 给 s92p 发送悄悄话 (0 bytes) () 05/31/2013 postreply 10:23:15

• 没准儿 -满地找牙- ♂ 给 满地找牙 发送悄悄话 满地找牙 的博客首页 (561 bytes) () 05/31/2013 postreply 10:27:59

• 谢谢，自己可以换吗，去修车铺300 块能打住吗 -s92p- ♀ 给 s92p 发送悄悄话 (0 bytes) () 05/31/2013 postreply 10:35:03

• 要是300块抗不住就是家黑店 -biglow- ♂ 给 biglow 发送悄悄话 biglow 的博客首页 (24 bytes) () 05/31/2013 postreply 11:38:57

请您先登陆，再发跟帖！