换了以后在高速上头10麦响得更邪乎

后来就好了点,估计是阻值不一样,新旧电极的形状不一样导致火花爆发的时间提前了,查过knock sensor没有code.所以一敲缸的时候ECU应该会延迟点火时间抑制爆震,再开一阵让ECU自我调整一下。

另一样东西也会造成敲缸: timing.等一下得接上timing gun查查,为这Nissan给做得很方便,专门拉了一条loop wire出来,把timing gun的卡钳卡上去就行了,虽说 timing由ECU控制,不过大家都知道电脑是会发疯的,如果timing不对的话可以reteach ECU,这容易,用不着scanner,可以DIY。
事后再报。
 

所有跟帖: 

what kind of gas do you use? -jwhzzj- 给 jwhzzj 发送悄悄话 (0 bytes) () 05/11/2013 postreply 14:43:47

87 since day one, pinged little, switched to primium recently h -MoonRivertttt- 给 MoonRivertttt 发送悄悄话 (72 bytes) () 05/11/2013 postreply 16:05:17

Should G35 use >91? -jwhzzj- 给 jwhzzj 发送悄悄话 (0 bytes) () 05/11/2013 postreply 17:34:36

it should, but since 87 could do why pay more? -MoonRivertttt- 给 MoonRivertttt 发送悄悄话 (0 bytes) () 05/11/2013 postreply 18:43:57

Wrong. If it is required, you should use 91. -jwhzzj- 给 jwhzzj 发送悄悄话 (91 bytes) () 05/11/2013 postreply 19:19:54

as long as the gas doesn't cause the engine pings, it then means -MoonRivertttt- 给 MoonRivertttt 发送悄悄话 (77 bytes) () 05/11/2013 postreply 21:06:37

Not true. -TBz- 给 TBz 发送悄悄话 TBz 的博客首页 (0 bytes) () 05/11/2013 postreply 22:28:28

可惜了这车 -TBz- 给 TBz 发送悄悄话 TBz 的博客首页 (0 bytes) () 05/11/2013 postreply 20:24:43

let me tell you something -MoonRivertttt- 给 MoonRivertttt 发送悄悄话 (283 bytes) () 05/11/2013 postreply 21:22:30

I don't believe what you said is true. Sorry! -khyang86- 给 khyang86 发送悄悄话 (0 bytes) () 05/12/2013 postreply 21:47:40

请您先登陆,再发跟帖!