First of all

来源: biglow 于 2010-12-29 21:33:25 [] [博客] [旧帖] [给我悄悄话] 阅读数 : (346 bytes)

Since you have gone so far,repair the timing belt.  Make sure you get the timing matched.  Then use a spark plug pressure guage, to screw in each spark plug hole, hand rotate the engine to see if the pressure changes.  If any one of those cylinders does not show pressure change, the valves for that cylinder need work.

所有跟帖： 

• Thanks brother, will try -triangle- ♂ 给 triangle 发送悄悄话 (0 bytes) () 12/30/2010 postreply 06:58:45

• check cylinder pressure is best option for now. -顺序是否有要求- ♂ 给 顺序是否有要求 发送悄悄话 (186 bytes) () 12/30/2010 postreply 09:30:01

• thanks a lot! unfortunely I did that for many times. -triangle- ♂ 给 triangle 发送悄悄话 (42 bytes) () 12/30/2010 postreply 11:12:34

• 回复：thanks a lot! unfortunely I did that for many times. -顺序是否有要求- ♂ 给 顺序是否有要求 发送悄悄话 (314 bytes) () 12/30/2010 postreply 19:26:33

• Replacing pistons is very easy once you removed the engine head. -buddy1234567us- ♂ 给 buddy1234567us 发送悄悄话 (378 bytes) () 12/30/2010 postreply 21:06:02

• Use new Honda belt, it will last 90k miles if you want to replac -顺序是否有要求- ♂ 给 顺序是否有要求 发送悄悄话 (0 bytes) () 12/30/2010 postreply 09:38:30

• sure, the cost would be around $70 -triangle- ♂ 给 triangle 发送悄悄话 (0 bytes) () 12/30/2010 postreply 11:13:15

请您先登陆，再发跟帖！