"Synthetic" oils (PAO or group 3 petroleum) need less

来源: khyang86 2010-09-11 19:46:37 [] [旧帖] [给我悄悄话] 本文已被阅读: 次 (868 bytes)
viscosity additives than the traditional petroleum oils to keep the viscosity at high temperatures. These viscosity additivies will break down gradually over time at the high stress/high temerature environment. So depending how hard the engine was running, the oil viscosity index will drop when the mileage is adding up. For example, at 3000 miles, the 5W-30 oil may become 5W-20 in some engines. "Synthetic" oils will hold up better becuase less additive is needed to keep the viscosity. Synthetic PAO oils is even better because the base oil itself is near 5W-30 index already, for example. There is no additive needed for the PAOs in this case. And the PAO molecular are all identical in the oil, the oxidation of the oil will not change the oil property very much.That is why synthetical oil can last longer. And the PAO synthetic oils will last even longer.

所有跟帖: 

"Synthetic" 不 “longer” -狼主- 给 狼主 发送悄悄话 狼主 的博客首页 (84 bytes) () 09/14/2010 postreply 17:21:36

请您先登陆,再发跟帖!

发现Adblock插件

如要继续浏览
请支持本站 请务必在本站关闭/移除任何Adblock

关闭Adblock后 请点击

请参考如何关闭Adblock/Adblock plus

安装Adblock plus用户请点击浏览器图标
选择“Disable on www.wenxuecity.com”

安装Adblock用户请点击图标
选择“don't run on pages on this domain”