回复：换轮胎好费劲啊，wrench 不对？

来源: 86-automotive 于 2009-07-25 14:08:21 [] [旧帖] [给我悄悄话] 阅读数 : (231 bytes)

you must use socket usually 19mm or 21mm, if nut too tight, you need long break bar, set vehicle on the ground,
start your vehicle, hit break pedal at the same time another guy loose the wheel nuts
you make it!!!!!!!!!!!!!!!

所有跟帖： 

• where did you learn this? dangerours -internuts- ♂ 给 internuts 发送悄悄话 internuts 的博客首页 (0 bytes) () 07/25/2009 postreply 15:48:22

请您先登陆，再发跟帖！