TBz,非常感激,机油滤清器底部的冲压铁板还发动机上的螺柱上,

来源: 华夏子孙 于 2006-11-18 04:57:53 [] [旧帖] [给我悄悄话] 阅读数 : (179 bytes)

because space is limited,管钳 too big.I tried 尖嘴钳插进铁板周围的圆孔中，逆时针拧, It doesn't work.I consulted with repair agent, he said it needs to dismantle 发动机的螺柱部件.

所有跟帖： 

• 冲压铁板上不是有孔吗? 应该利用一下. -xxhhwxc- ♂ 给 xxhhwxc 发送悄悄话 (137 bytes) () 11/18/2006 postreply 06:48:14

• I asked the repair agent for 专用工具, He said no 专用工具.I tr -华夏子孙- ♂ 给 华夏子孙 发送悄悄话 (0 bytes) () 11/18/2006 postreply 06:54:44

• I tried 用凿子逆时针敲 many times.but it dosen't move. -华夏子孙- ♂ 给 华夏子孙 发送悄悄话 (0 bytes) () 11/18/2006 postreply 06:56:21

• 可能是孔离中心太近了,力矩不够. -xxhhwxc- ♂ 给 xxhhwxc 发送悄悄话 (49 bytes) () 11/18/2006 postreply 07:04:51

• I also tried 凿子从外沿敲.failed too. -华夏子孙- ♂ 给 华夏子孙 发送悄悄话 (0 bytes) () 11/18/2006 postreply 08:25:52

• Go to hardware store -TBz- ♂ 给 TBz 发送悄悄话 (373 bytes) () 11/18/2006 postreply 13:34:59

请您先登陆，再发跟帖！