12 point是不是可以代替所有同口径的hex socket来使用?还是最好各自用各自的?
问个impact socket的问题
所有跟帖:
• 最好各自用各自的.实在没有替代凑合。12边的拧6边的容易脱扣 -色大胆小- ♂ (0 bytes) () 12/14/2012 postreply 04:49:57
• 其实口径匹配还是严丝合缝的,可能是受力点差一半,所以承受能力不同? -满地找牙- ♂ (499 bytes) () 12/14/2012 postreply 06:50:25
• 我把图形修改了一下,这个要更准确些 -满地找牙- ♂ (149 bytes) () 12/14/2012 postreply 07:00:16
• 你是动了闹筋的,我可没想那么多,就是直觉和少量经验。不一定对 -色大胆小- ♂ (0 bytes) () 12/14/2012 postreply 07:03:56
• 没办法,都是让德国车给闹的 -满地找牙- ♂ (2400 bytes) () 12/14/2012 postreply 07:20:58
• 仔细分析的话,12边和6边的受力面积是基本相同的,关键是号输要匹配。 -US_CAR.- ♂ (0 bytes) () 12/14/2012 postreply 08:01:30
• 问题不在于几个point,而在于尺寸 -biglow- ♂ (80 bytes) () 12/14/2012 postreply 07:14:27
• 感觉上是你说的对 -满地找牙- ♂ (119 bytes) () 12/14/2012 postreply 07:23:32
• 回复:问个impact socket的问题 -萤火虫17pdr- ♂ (369 bytes) () 12/14/2012 postreply 11:33:48
• ? 没见过12点螺栓 -US_CAR.- ♂ (0 bytes) () 12/14/2012 postreply 12:13:46
• 不好意思,不会发照片,要不可以发个照片看就清楚了。 -萤火虫17pdr- ♂ (0 bytes) () 12/14/2012 postreply 13:22:06
• 回复:不好意思,不会发照片,要不可以发个照片看就清楚了。 -US_CAR.- ♂ (106 bytes) () 12/14/2012 postreply 20:06:27
• impact socket的有12角的吗?我只见过6角的。12角不宜受冲击力。 -史迷- ♂ (370 bytes) () 12/14/2012 postreply 21:25:40