Are your taking the wheels off? I suppose you are not changing

You can change/rotate wheels, you can't change tires.

Go trunk and find the log nuts lever, that is what you should use. Tools, use right tools!! Never compromise tools!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

所有跟帖： 

• Yes.但不知道哪里可以找到nut尺寸，然后买工具。 -ardmore- ♂ (0 bytes) () 07/25/2009 postreply 11:02:53

• 回复：Yes.但不知道哪里可以找到nut尺寸，然后买工具。 (图) -jingwei-wang- ♂ (336 bytes) () 07/25/2009 postreply 11:33:21

• 在auto zone看到一个十字形的wrench， -ardmore- ♂ (92 bytes) () 07/25/2009 postreply 12:36:04

• Remove the jack, step on using your body weight to loose -internuts- ♂ (170 bytes) () 07/25/2009 postreply 12:44:40

• read your manual then go to walmart, get a "+" $6 -jingwei-wang- ♂ (0 bytes) () 07/25/2009 postreply 12:46:08

• 想买一impact wrench,在配上现有的socket,行不行？ -ardmore- ♂ (0 bytes) () 07/25/2009 postreply 12:58:43

• NO -jingwei-wang- ♂ (261 bytes) () 07/25/2009 postreply 13:20:44

• 不用气泵行不行，好像有用低电压、电驱动的。 -ardmore- ♂ (0 bytes) () 07/25/2009 postreply 13:46:33

• did your car not come with a wrench and jack? -jingwei-wang- ♂ (0 bytes) () 07/25/2009 postreply 13:21:55

• come with a 千斤顶，好像有个长柄可以用来拧。 -ardmore- ♂ (22 bytes) () 07/25/2009 postreply 13:45:02

• 用2尺长的铁管子， -曲线救国- ♂ (223 bytes) () 07/25/2009 postreply 15:34:13

• 德国车不好拧， 美国车的质量看来已经接近德国的了 -北航新保理英子- ♀ (0 bytes) () 07/25/2009 postreply 16:33:31

• 我的BMW也是这么换的， -曲线救国- ♂ (196 bytes) () 07/25/2009 postreply 16:53:16

• 这嘛大的学问 -北航新保理英子- ♀ (0 bytes) () 07/25/2009 postreply 17:19:36

• 介都不懂，，， -曲线救国- ♂ (48 bytes) () 07/25/2009 postreply 17:26:05

• Ah?? "顺时针扳"?????????????? -internuts- ♂ (0 bytes) () 07/25/2009 postreply 16:47:40

• 错了。逆时针，是卸，，， -曲线救国- ♂ (0 bytes) () 07/25/2009 postreply 16:54:29

• 顺时针扳!?!?!? 搬断螺栓 for sure! -WayCool- ♂ (0 bytes) () 07/26/2009 postreply 06:59:48

• use your foot, not hand -zhang2002- ♀ (253 bytes) () 07/26/2009 postreply 18:49:00