1.该段录像中并没有显示哪儿有油,是不是在这个盖子里面有点油?(因为里面有轴承)
2.录像中先做了两个记号,这样换完struct后就不用重做alingment.我没明白怎样做记号,猜想是悬挂系统的轴和轮胎件的结合部,两者是套上固定的,应保持高度和旋转角不变(套上的可以旋转不是?)不知对吗?
• 回复:strut漏油及修理请教 -carjack- ♂ (518 bytes) () 02/18/2008 postreply 09:18:55
• Sorry typo - struts -carjack- ♂ (0 bytes) () 02/18/2008 postreply 09:28:03
• 车顶子,大弹簧要崩伤人的,不会弄就别弄,伤了自己咋办. -fixanycars- ♀ (0 bytes) () 02/18/2008 postreply 16:02:10
• No fix, just change -biglow- ♂ (120 bytes) () 02/18/2008 postreply 11:31:13
• 回复:strut漏油及修理请教 -austman- ♂ (87 bytes) () 02/18/2008 postreply 17:03:17
• 多谢各位, 会有交代的 -chinomango- ♂ (466 bytes) () 02/18/2008 postreply 18:10:54
• I did last week, part about $30. -Mark8- ♀ (0 bytes) () 02/18/2008 postreply 20:54:48
• 三种修法,1,如果车开起来没有异样,不必修理。2,买二手strut -austman- ♂ (353 bytes) () 02/18/2008 postreply 23:58:17
• 完全同意 -biglow- ♂ (60 bytes) () 02/19/2008 postreply 05:42:04
• Rest is correct but 不买二手struts -carjack- ♂ (0 bytes) () 02/19/2008 postreply 09:33:14
• 多谢各位,细节就是工艺呀.领教了. -chinomango- ♂ (0 bytes) () 02/20/2008 postreply 22:52:40
• 交代1 -chinomango- ♂ (476 bytes) () 02/23/2008 postreply 10:10:56
• 交代2 -chinomango- ♂ (393 bytes) () 02/26/2008 postreply 09:47:06