请教各位大侠关于mercury villager CV joint 问题

我以前都是用榔头把cv joint 从axle上敲下来。但是这个mercury villager 的敲了几下没敲下来，回头看manual说要卸inner cv boot，从inner boot那边把outer boot 滑上去。搞的我有点不拿不定主意， 怕如果不能敲我硬敲给敲坏了。我又不想卸卸inner boot，主要是手里没有那么多clamp用。

各位大侠说说，到底能不能敲？

所有跟帖： 

• left side or right side -Japangirl- ♀ (828 bytes) () 12/23/2006 postreply 16:34:53

• it is in the left hand side -xxhhwxc- ♂ (289 bytes) () 12/23/2006 postreply 17:01:11

• you can finish it tonght -japangirl- ♀ (575 bytes) () 12/23/2006 postreply 18:39:41

• the clamps in the shaft head are different -Japangirl- ♀ (27 bytes) () 12/23/2006 postreply 18:44:51

• WOW! Girl know a lot about car. -soccer- ♂ (0 bytes) () 12/23/2006 postreply 19:20:08

• how do you know for sure that's a girl? ;) -DaBoys- ♂ (0 bytes) () 12/23/2006 postreply 19:41:15

• 回复：how do you know for sure that's a girl? ;) -walawala66- ♂ (81 bytes) () 12/23/2006 postreply 20:20:38

• 回复：it is in the left hand side -DRDC- ♂ (145 bytes) () 12/23/2006 postreply 21:07:45

• 回复：请教各位大侠关于mercury villager CV joint 问题 -DRDC- ♂ (102 bytes) () 12/23/2006 postreply 20:29:29

• final report -xxhhwxc- ♂ (565 bytes) () 12/23/2006 postreply 21:38:17

• 是万向节坏了吗？还是橡胶套坏了？ -US_CAR- ♂ (0 bytes) () 12/23/2006 postreply 21:51:57

• 橡胶套 -xxhhwxc- ♂ (58 bytes) () 12/23/2006 postreply 22:05:30

• Buy EZ-Boot and take you only 45 minutes. -US_CAR- ♂ (0 bytes) () 12/24/2006 postreply 10:45:30

• Save you time and money: -US_CAR- ♂ (128 bytes) () 12/23/2006 postreply 22:16:35